We have a well. Very high pH. The test kit and tests done at pool store always read 8.2. It is higher than that because I add a gallon of acid and it's still the same. 1 add another gallon and it may lower some. Yes I'm doing it right, had a pool for 20+ years, but this is only my 2nd summer with the salt system. So here's my actual question. Is there a test kit that shows the whole pH scale from 0-14? I find many test strips online but I don't trust them. I have 3 different brands, purchased from pool stores and they all read that pH is 7.6ish. I have a salt generator and it's not making chlorine. 0 in pool, so I know pH is way too high. Salt level is good. Water is clear and looks great. I want it to stay that way. It's not going to in 95° with no chlorine being produced. I appreciate your help!
pH above what tester shows 8.2 pH goes to 14
- Thread starter kressebigcreek
- Start date
- Jul 21, 2013
- 66,288
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Get an Apera pH20 pH Meter with calibrating solutions. Calibrate regularly and it will do fine.
Apera Instruments Value Series PH20 Pocket pH Tester pH Meter Kit
Simply the most reliable entry-level pH tester with the best value. Apera PH20 Value pH Tester Kit is suitable for general water applications pH measurement, including hydroponics, pools and spas, water treatment, aquariums, aquaculture, beverage making, etc.
aperainst.com
High pH will not affect your SWG. So whatever the problem is why it is not working it is not due to your high pH.
Hmmm. Last year when I first started up with the salt generator, it wasn't producing chl so I called the manufacturer help line and they said it was the pH. I got it down and it started producing.
The TA controls the effect acid has on the pH.
What is the TA (Total Alkalinity).
- Jul 21, 2013
- 66,288
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Keep adding acid to lower pH in 0.3 increments every 15-30 minutes until you get your pH into the 7's.
No magic to it. Just lots of acid.
No magic to it. Just lots of acid.
Use PoolMath to calculate the amount of acid to use to lower the pH from 8.0 to 7.2.
As you can see, the TA determines how much acid to use.
If the TA is 100, you use 53 oz acid.
If the TA is 200, then you would use 100 oz of acid etc.
As you can see, the TA determines how much acid to use.
If the TA is 100, you use 53 oz acid.
If the TA is 200, then you would use 100 oz of acid etc.
PoolMath
Discover the calculator behind the perfect pool, PoolMath. Dealing with pools has allowed TFP to become the original authors of the best calculator on the net.
www.troublefreepool.com
If your cell has scale caused by high pH, you need to clean the cell.
Otherwise, the pH has no effect on the cell's production.
Just because the chlorine is zero, does not mean that the cell is not working.