Pentair VSF Pumps Flashing two Different Times

[jfdudek1]

Afternoon Pool Gurus, quick one here. I went to adjust the Date and time on my VSF pump and was able to correct the date, but the time is now alternating between the correct time I just set and Saved, and a different time: 12:48AM and 2:05PM... Just keeps switching back and forth on the display.

I checked the time set on my EasyTouch panel, and it is showing the correct time: 12:48AM. Where is this 2nd time coming from and how do I remove it?

Thank you!

 

[nikolasmor]

The 2:05PM is most likely the a programmed time for preset speed changes.

 

[jfdudek1]

Ah, ok. Let me go check that. Thx!

 

[jfdudek1]

No, that was not it. The 2nd time that flashes is about 2hrs and 10 minutes ahead of the correct time... it advances in synch with the correct time that I programmed.

 

[guinness]

You can also do a factory reset of your Intelliflo, but you'll lose any settings you changed.

reset intelliflo pump to factory settings – Ask the Pool Guy

askthepoolguy.com