Pentair Ultra Temp Heat Pump

epichs

New member
Oct 29, 2024
3
Miami, FL
Surface
Plaster
Chlorine
Liquid Chlorine
Hello to all,

My heat pump does not say service on the panel, but when I run it, it doesn’t heat the spa or the pool. I tried the spa alone and it didn’t lower the temperature. I ran it about two hours and since I live in Miami, the weather has been a little windy but 82°F more or less I do notice on the main breaker box in my garage and at the heat pump every minute and a half or so a humming noise briefly and stops like if it was a surge. On another note I ran it about two weeks ago and it heated it up fine. Any help would be greatly appreciated.
 

Attachments

  • IMG_4871.jpeg
    IMG_4871.jpeg
    425.4 KB · Views: 3
The "surge" could be the compressor trying to start.

You need an HVAC Tech with the proper tools and gauges to check it out.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.