Hello,
I am new to TFP, I attempted to locate others that may have had a similar problem, but I struck out.
Here is what I have going on.
I went to pump to backwash this morning. Digital screen read ERR 0021.
From manual:
"– Communication Link between the HMI and Motor control has been lost: Check the jacketed wire on the back side of the keypad inside the drive top cover. Ensure that the 5 pin connector is properly plugged into the socket and that there is no damage to the cable."
I removed the four screws and the compartment was filled with water. I dried out the water and now letting the air/sun completely dry out compartment.
Has anyone seen this, and what was your fix/solution?
Thanks in advance.
Chase
I am new to TFP, I attempted to locate others that may have had a similar problem, but I struck out.
Here is what I have going on.
I went to pump to backwash this morning. Digital screen read ERR 0021.
From manual:
"– Communication Link between the HMI and Motor control has been lost: Check the jacketed wire on the back side of the keypad inside the drive top cover. Ensure that the 5 pin connector is properly plugged into the socket and that there is no damage to the cable."
I removed the four screws and the compartment was filled with water. I dried out the water and now letting the air/sun completely dry out compartment.
Has anyone seen this, and what was your fix/solution?
Thanks in advance.
Chase