I have a pentair system,pump with the display screen. Display went completely blank while the pump was off. Unit is getting power. I don't know if whole system is bad or just display burned out. I took apart to look at display panel circuit board and it looks very clean and dry. Any help is appreciated!
Pentair problems!!!
- Thread starter Jeff allen
- Start date
- May 3, 2014
- 63,081
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
How old is your system? Any chance you're under warranty? 2 years standard, 3 if combined with 2 or more additional Pentair products.
Do you have any neighbors or friends that would let you borrow a keypad assembly?
We have a donor we use to quickly diagnose whether it's the keypad or the whole drive.
If its your drive, you're probably in the market for a new pump.
No further testing will be needed if a donor keypad does/does not work. Be careful of the drive; high voltages stored at the motor terminal.
Do you have any neighbors or friends that would let you borrow a keypad assembly?
We have a donor we use to quickly diagnose whether it's the keypad or the whole drive.
If its your drive, you're probably in the market for a new pump.
No further testing will be needed if a donor keypad does/does not work. Be careful of the drive; high voltages stored at the motor terminal.
Sorry for the delayed response, it's a superflow drive definitely out, contacted installer who had the invoice paperwork and in 10 days I was beyond warranty time frame!. Contacted pentair and they are sending new unit!. Thank you for your responses and again apologies for my delayed response!
- Nov 12, 2017
- 12,710
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
And they all lived happily ever after! Congrat's on catching that in time.
