I think my SWG has died but wanted to get the opinions of some more experience folks!! 
My SWG was heading into its 4th season. It had been working fine through last season but after getting the salt level up to 4800 ppm, the SWG is still reading low. I have a salt meter and calibrated it using a standards solution (3000 ppm), and had the local pool store verify the same within 200 ppm. The manual says the salt level should be between 3200 and 4200, so I'm already high per the manual. I don't want to keep adding salt to see what happens but I'm thinking the unit has failed. I've power cycled the unit several times but no change. The water temp is about 67 but don't think that should be an issue per the manual. Would welcome any thoughts or words of wisdom if I'm missing something. Thanks in advance!!
My SWG was heading into its 4th season. It had been working fine through last season but after getting the salt level up to 4800 ppm, the SWG is still reading low. I have a salt meter and calibrated it using a standards solution (3000 ppm), and had the local pool store verify the same within 200 ppm. The manual says the salt level should be between 3200 and 4200, so I'm already high per the manual. I don't want to keep adding salt to see what happens but I'm thinking the unit has failed. I've power cycled the unit several times but no change. The water temp is about 67 but don't think that should be an issue per the manual. Would welcome any thoughts or words of wisdom if I'm missing something. Thanks in advance!!