Like everybody else in Texas, I suffered damage to my pool equipment. I have a Jandy system with aqualink. My Jandy heater cracked a manifold (the least that could be wrong) and I have found a pool repair with a new in the box Pentair heater. They tell me it will work with the aqualink automation. Can anyone confirm this please.
Pentair Heater with Aqualink
- Thread starter austinmc62
- Start date
- Jul 21, 2013
- 53,182
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Your Aqualink will control the Pentair heater fine using the “fireman’s switch “.
www.troublefreepool.com
Your Aqualink will control the Pentair heater fine using the “fireman’s switch “.
Heater Control with Automation - Further Reading
www.troublefreepool.com
I have a new Pentair heater and it works great with my iAqualink 2.0.
I have a relatively new Pentair 400BTU heater and it was connected to my older (10 yrs) Jandy Aqualink with no issue. It turns it on and off and allows me to adjust the temperature. I was told only to use the Jandy controller and do not mess with the keypad on the heater itself.