Finally got my fiberglass pool in. When I cut the tanning ledge for the bubblers I noticed that it was thicker than the normal wall thickness. How should I compensate to make the bubbler fit?….I guess I can get longer screws and have the light recessed and inch or so?
Pentair colorvision bubblers
- Thread starter Dweed
- Start date
- May 3, 2014
- 58,745
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Sorry you have not received any responses. Let's see if this bump help you get some.
Tcadwall0
Gold Supporter
- May 19, 2021
- 207
- Pool Size
- 12900
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-20
My PB used a grinder to thin the immediate area. This was a RiverPoolsAndSpas pool. Not sure what your manufacturer would recommend.
---edit - on the underside of course.
---edit - on the underside of course.