Pentair 180009 Filter Type

[chandlerdt]

What size filter grids are required for the FNS Plus p/n 180009 (on a sticker label); p/n 190029 Rev G on the filter bottom. I want to replace the orings and filter grids, and have them on hand when I take system apart; its 10yrs old and I feel they are due for new ones. Picture of label & associated numbers attached. TYIA.

Dane

 

[Jimrahbe]

Dane,

The 180009 is the 60 Sq. Ft. model...

Here are a couple of grid choices... Pleatco PFS3060 Filter Grid for Pentair, American, Hayward, Pac-Fab (7 full + 1 half), 60 sq ft

Or Pentair Grid Assy., 60 Sq. Ft. Filter - 59023300 - INYOPools.com

Thanks,

Jim R.

 

[chandlerdt]

Thank you for the info. If I may, where is that info listed for my model?

 

[Jimrahbe]

Chandler.. I just looked in the manual..

See it here, page... 2... http://www.wightwaterpools.com/sitebuildercontent/sitebuilderfiles/fnsplus.pdf

Once you know you have a 60 sq ft filter then just look for grids for that fit the 60 sq foot size..

Thanks,

Jim R.

 

[chandlerdt]

Thank you. I finally found the manual online and downloaded it. Also see where they have the part numbers transposed for the orings.