Passed OCLT but water still cloudy

Bluelilly

Silver Supporter
LifeTime Supporter
May 12, 2012
191
Middle Tennessee
Pool Size
31000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
4 days ago I needed to drain pool due to recent heavy rains. All my levels had been on target to that point. Got distracted and drained below skimmers. I added water back now pool is cloudy.

It’s not sunny right now so I haven’t rechecked CYA but I may be around 60 now. Also my salt level dropped so SWG wasn’t producing. Realized that on Friday so I added bleach. So I did OCLT last night and I didn’t lose any FC. I backwashed filter yesterday and ran pool longer but still cloudy.

FC 4.5
CYA 60?
Ph 7.4
CH 50
TA. Didn’t check

This morning my FC was 4.5. Added more bleach to bring up FC

So, right now, I am adding bleach and treating as nonSWG pool. We don’t close our pool and dose with bleach in winter so I don’t want to bring CYA up.

Ian need to SLAM but if there are any other suggestions to try first. I will be going out of town next week so I can’t that process until I get back.

Appreciate any suggestions.
 
Keep the chlorine elevated a little over normal. Make sure the filter is clean and, most importantly, run your pump 24/7 to allow your filter the opportunity to clear the water.

I see no need to SLAM
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.