ORP change out

[Nordsk Bjorski]

I have a Hayward Sense and Dispense system and I’m considering ditching it entirely. I recently disconnected the ph probe and the acid dispenser, and I really would like to ditch the ORP system for a simpler way to control my Salt Cell and the chlorine output. I’m really fed up with this overly complicated system.
Is there a simple timer that I could wire in and just monitor that until I get the chlorine production dialed in?
Thanks as always.

 

[ajw22]

You should be able to dial in your SWG % for the FC output with your pump runtime without having a timer.

Although you need a timer to turn the SWG off when the pump is off. Read SWG How It Works - Further Reading

Many folks use a mechanical Intermatic T101 or 1T104 timer.