Opinion Needed

[rockyboy]

I have a 14 year old Pentair Tagelus TA100D (original sand) that has started leaking between the filter body and the adapter buttress. The buttress requires a special tool (like a closed hex wrench) and I'm told that it could damage the filter trying to break it free after 14 years. The o-ring is about $15. The new filter is about $1100 not counting the sand. If I can obtain the special tool or figure out an option, I still may mess something up that makes the filter not usable. Just wondering if anyone has tried to replace the o-ring on a filter this old or if it would be better to replace the whole thing including new sand? I would have to do it myself since almost all the pool companies around here are booked for months and I don't want to keep watering the same spot in my yard. Thanks in advance!

 

[1poolman1]

I've lost so many of the "hex wrenches" that come with those filters I can't keep count. I now use this tool. It works quite well.

Husky 34 in. Strap Wrench with 3-1/2 in. Capacity 80-544-111 - The Home Depot

Tighten and loosen pipe fittings by using this adjustable and rust-resistant Husky Strap Wrench. Best for use with polished pipes.

www.homedepot.com

Work it slow as there is probably some sand in the threads that will cause it to bind a bit. Not sure what the 3.5" capacity in the description is supposed to be because the strap is plenty long enough.

 

[rockyboy]

Thanks for the tip...I'll give it a try. The metal version of the pentair tool is north of $250!