One of my above ground pool support post is buckling? What to do?
- Thread starter darousseau
- Start date
- Jul 21, 2013
- 65,181
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Measure the height of the T on the buckling post and write it down. Measure it weekly and as long as it does not change you are good. If it begins bending and dropping then drain the pool.
See if you can fins a new leg from the pool manufacturer.
Measure the height of the T on the buckling post and write it down. Measure it weekly and as long as it does not change you are good. If it begins bending and dropping then drain the pool.
See if you can fins a new leg from the pool manufacturer.
