Omnilogic Schedule Help

[Peiloy]

Hi,
I am running an Omnilogic, and I have a question. On my Returns, I have an automated valve which the cams are set to throttle when I turn a feature on. Because I don't have a schedule on the valve though, when I exit a theme the valve goes to a throttled position which is not great for my pump as all other features are off at that point. Is there a way to set a schedule to be on 100% of the time? Every-time I set the schedule from 12 am to 12 am it defaults to 11:59pm and 12am which throttles the valve for one minute.

Thanks for the help!
Troy

 

[RSKelme]

Is it a Hayward valve actuator (GVA-24)? I’m not sure what you mean by the valve is set to throttle. The actuator will either go to one position or another. What is the valve selecting between? I’m pretty sure there is a setting to have the pump stop when the valves are adjusting. I know my old AquaLogic had that option and I thought I ran across that when setting up my OmniLogic.

 

[Peiloy]

Is it a Hayward valve actuator (GVA-24)? I’m not sure what you mean by the valve is set to throttle. The actuator will either go to one position or another. What is the valve selecting between? I’m pretty sure there is a setting to have the pump stop when the valves are adjusting. I know my old AquaLogic had that option and I thought I ran across that when setting up my OmniLogic.

It is a GVA-24. I don’t have it set to fully open - fully closed though. I set the internal cams so that it’s either fully opened or throttled. I do have a setting to stop the pump when my valve is changing, but that isn’t really the issue though. The issue is that when a theme is turned off the valve goes to an off position, which is throttled in my case. The only way to default it to open is by putting it on a schedule, but I cannot figure out how to program a schedule that is in an always on state.