OmniLogic error messages

[jrsmith25]

I am aware these are likely electrical connection issues. I opened my box up and everything looks solid with no burn marks. I will attach a photo (although that won’t really be good enough for you to diagnose anything) just in case something is dramatically off.

The errors I keep getting are:

CHLOR Relay K2 Stuck Open Chlorinator1.

T-CELL Current Sensor Short Chlorinator1.

I visited the Hayward OmniLogic page where it had photos and potential problems and it didn’t seem to apply to me.

 

[jrsmith25]

I probably just need to get the electrician out here that installed it. Was hoping I could figure it out

 

[ajw22]

There are three fuses on the Omnilogic motherboard, two are 4 amp and one 20 amp. Check the fuses. It is often one of the pink fuses that blew.

Also try re-seating the SWG cable and re-setting the system