Node Server on PG3 on Polisy

[Andrew Herman]

Looking for a bit of help. I'm running a new Polisy from Universal Devices and available is JSnode server which is supposed to interface with the Pentair Pool controller. I can install the node server and the node appears in my control panel. However, no data is transferred from the pool controller.

I'm sure I'm missing some step or connection. The system is linked to my internet/computer via ethernet and the Screenlogic brick.

Basically, I'm trying to set it up so that the lights turn on at sundown and turn off with rest of my lighting system.

Any ideas would be appreciated.

Thanks,

Andrew

 

[ajw22]

@rstrouse you understand this question?

 

[rstrouse]

Actually if you tell njsPC your latitude and longitude it will allow you to have schedules in EasyTouch that use sunrise and sunset. That being said there are a couple of different ways to interface with ISY. I don't think anyone has created an interface yet in polyglot. All of the pieces are there it just needs somebody with an ISY implementation to set it up.

 

[Andrew Herman]

What is NJSPC? Thanks.

 

[rstrouse]

njsPC is a way for me to save keystrokes typing nodejs-poolController. You will find the repo here. When combined with dashPanel you get a UI for managing your system. All of this dovetails nicely with your EasyTouch.

GitHub - tagyoureit/nodejs-poolController: An application to control pool equipment from various manufacturers.

An application to control pool equipment from various manufacturers. - tagyoureit/nodejs-poolController

github.com

GitHub - rstrouse/nodejs-poolController-dashPanel: A dashboard panel for tagyoureit/nodejs-poolController

A dashboard panel for tagyoureit/nodejs-poolController - rstrouse/nodejs-poolController-dashPanel

github.com