After a big storm and power outage I noticed that my Hayward Aqua Nature chlorine generator display and power lights were off. Also, I don't hear the clicking sound after 15 seconds when I set the unit to auto. I can hear a low hum from the transformer when the unit is plugged in.
These are the measurements I was able to take....
red terminal = 31.28V
R17 = 23.72V & 22.53V
TP13 = 4.99V
Display connector Pin 4 = 0
Remove Display Board
TP13 = 4.99V
TP14 = 4.99V
Riser board pin 4 = 0
TP14 to R15 = 8 ohms
Riser board pin 4 = 20 ohms
These are the measurements I was able to take....
red terminal = 31.28V
R17 = 23.72V & 22.53V
TP13 = 4.99V
Display connector Pin 4 = 0
Remove Display Board
TP13 = 4.99V
TP14 = 4.99V
Riser board pin 4 = 0
TP14 to R15 = 8 ohms
Riser board pin 4 = 20 ohms
