Getting salt adjusted to proper levels after start up. looking to get sat to 3600. Getting closer. Pool install/ startup guy came over and decided to dump more salt in my pool. I caught him in the nick of time. It shot up over 4000. It has started to come down a bit to like 3800. Im hoping in a week or so it settles down more. All my other level in adj stages. How important is CH? The only other pool Ive had was a above ground vinyl. And I did not pay much attention to the CH. If its critical what brand is recommended. I want to stay away from adding too many things to my pool. so far only thing in is CYA, Salt, Muratic acid.
Working on:
salt levels currently too high * waiting to see if comes down a bit more
PH level too high, Muratic acid to lower 7.2, then Aerating to raise 7.6
TA too high, Muratic acid to lower 7.2, then Aerating to raise 7.6
CH too low, raise with calcium chloride or calcium chloride dihydrate * not done yet, waiting for help on this
Readings...
Temp 89
FC 4.0
CC 0
PH 8.2
TA 140
CH 100
CYA 80
Salt 3800
CSI -----
Working on:
salt levels currently too high * waiting to see if comes down a bit more
PH level too high, Muratic acid to lower 7.2, then Aerating to raise 7.6
TA too high, Muratic acid to lower 7.2, then Aerating to raise 7.6
CH too low, raise with calcium chloride or calcium chloride dihydrate * not done yet, waiting for help on this
Readings...
Temp 89
FC 4.0
CC 0
PH 8.2
TA 140
CH 100
CYA 80
Salt 3800
CSI -----