Well bought a home with a 6 year old 19,000 gallon plaster inground pool. It was a green mess with frogs and all kinds of good stuff living in it. We hired a pool guy to drain, acid wash, fill, and do the initial chemicals. This was about a week ago... and I finally got my Taylor K-2600 kit from Amazon today. So here are what my current numbers look like:
FC: 18.0
CC: 0
PH: 7.6
TA: 150
CH: 400
CYA: 70
So the FC is way high... but I assume that is fine as it will drop over time? The CH and CYA also show as a bit high via the poolcalculator with the only solution being to drain 35% and 45% respectively of the pool water. Did the pool guy jack something up with these or can I expect them to change as things get stabilized?
Thanks!
FC: 18.0
CC: 0
PH: 7.6
TA: 150
CH: 400
CYA: 70
So the FC is way high... but I assume that is fine as it will drop over time? The CH and CYA also show as a bit high via the poolcalculator with the only solution being to drain 35% and 45% respectively of the pool water. Did the pool guy jack something up with these or can I expect them to change as things get stabilized?
Thanks!