New North Carolina pool build

Jul 11, 2016
46
cary, nc
HI there. I have been lurking for sometime and even have began a thread a few times but never finished. We began our pool journey over 5 years ago but due to funds and just not finding a pool contractor we liked, it was delayed. After meeting over 12 contractors we finally found one and signed a contract in December. We are about 1/2 way. We are new to pool building and pool owning so please offer any comments.

25’ x 40’ pool, from 3’ to a depth of 7’ deep with raised spa.

Construction and design features:

• Complete site plan and design including final AutoCAD construction plans. • All required City of Cary permits. • All paperwork for HOA approval, if required. • Pool layout and forming with #3 rebar steel grid set and tied 12” on center each way and installed per ASTM code. • Standard excavation with soil spread on-site. • Complete #57 stone gravel sub-base including hydrostatic relief system. • 4,000 PSI pneumatic shotcrete pool construction, after 28 days, with 10” bond beam and 8” minimum thickness in walls and floor. • Schedule 40 PVC plumbing and Jandy Neverlube valves. • Plumbing to be encased in pool shell where feasible. • Plumbing to be pressure tested and inspected during construction. • Two main drains with tamper proof grates and frame. • One row 6” x 6” waterline tile under coping in pool ($8.00/sq.ft. allowance). • One set of walk in steps and (2) underwater benches as per plan. • Grand sun-ledge with umbrella holder and (2) bubblers as per plan. • Bull-nosed Travertine, Stone to be picked from standard selections at Luck Stone or Stone Center. • 7’ spa raised 18” as per plan, with stacked or veneered stone surround, 8 therapeutic Waterway jets installed in Signature multiple jet assembly. Polaris QT 2hp air blower,. Pool and spa equipment to include: • 1.5 hp. Jandy Stealth “super quiet” recirculation and filtration pump. • Jandy 60 square foot DE (diatomaceous earth) filter. • Two Jandy colored LED pool lights and one Jandy colored LED spa light. • Two standard suction skimmers and up to four pool returns.

• Jandy Laars LX 400,000 btu dual thermostat pool and spa gas heater. • Jandy Purelink Aquapure automatic salt generating system. • Polaris 280 automatic pool cleaner with separate booster pump. • Jandy Aqualink RS “total control” command center with wireless waterproof PDA controller. Controlling pool, spa, infinity edge, lights, pool cleaner, heater, and salt system. As well as, providing you with outdoor temperature and pool water temperature. Includes freeze protection. • Upgraded Pebbletec natural stone interior finish in your choice of 18 different colors, with 15 year warranty. • 25LF of 21” raised stone wall with (1) sheer decent. • All associated high and low voltage electrical runs, conduits, and connections by our preferred specialty electrician. • All gas lines and connections by our preferred gas contractor. • Start-up, instruction, and initial water chemistry balance including initial balancing of salt. • One set of maintenance equipment including residential test kit, brush, pole, thermometer, net, vacuum hose, and vacuum. • One year “Hassle Free” warranty, standard manufactures warranties, Jandy “Pro Edge Builder” exclusive three year equipment warranty. 30 days of FREE pool service after completion of pool.
  • 800 sf Travertine decking

Also includes front and back irrigation and sod, 390 sf aluminum fence and a good amount of grading as our yard was a slope.
 
Very nice! A couple of things.

You may want to consider either a 2-speed or variable speed pump rather than single speed. You will be able to save a lot of $ if you can dial it down in RPM.

For your pool's electrical subpanel, you should consider a good quality surge protector. I used the Square D HEPD80. You have a lot of expensive components there.
 
Very nice! A couple of things.

You may want to consider either a 2-speed or variable speed pump rather than single speed. You will be able to save a lot of $ if you can dial it down in RPM.

For your pool's electrical subpanel, you should consider a good quality surge protector. I used the Square D HEPD80. You have a lot of expensive components there.

Hey Gary, did you install the Square D yourself or did you have an electrical contractor do it? Just wondering if I should DIY or not.


Sent from my iPhone using Tapatalk
 
Very nice! A couple of things.

You may want to consider either a 2-speed or variable speed pump rather than single speed. You will be able to save a lot of $ if you can dial it down in RPM.

For your pool's electrical subpanel, you should consider a good quality surge protector. I used the Square D HEPD80. You have a lot of expensive components there.

Thank you so much for reading through the long post and making those suggestions. We literally have no clue. We will talk with contractor. Thanks again!
 
HI! I am so glad you found someone you clicked with and got this project well under way! I love the design!

Now is the time I ask about your test kit from the PB. Share what he is going to give you so we can fill in any holes.

You should also start to fill in your signature-settings (upper right), edit sig. (middle left). Put in pool size (gals), special features, equipment, test kit, etc.

Here is a set of links I put together for new pool owners. It is a lot of info. so this will give you time to start reading it. Once you start using it things will start to make sense.

Print these out:
Pool School - Basic Pool Care Schedule

Pool School - Recommended Levels

Bookmark these:
Pool School - Recommended Pool Chemicals

http://www.troublefreepool.com/calc.html

Pool School - ABCs of Pool Water Chemistry

Make sure to ask any and all questions you might have no matter how small! We have all been where you are at one point.

Kim:kim:
 

Enjoying this content?

Support TFP with a donation.

Give Support
Good news, the plumbing passed inspection and they have now begun the grading and leveling of all the dirt. We have a slight delay now as after the grading was complete, it appears we will need unanticipated steps or walls to handle some of the elevation. You can see in the pic, we were expecting the steps around the pool, but apparently now they may need to be extended through the patio which was not how I had envision. I ask the PB to come with his landscaper and provide us with options. The patio was already smallish (funding and impervious limits from the town) so I want to make sure we maximize our patio space the best we can.
 
I read in your plaster thread that you are still working on elevation issues. If you have an interest, you can see my build thread for how ours was handled. We have quite a slope over the whole pool area. The drop was 7' over 40' run for reference. The link is in my signature.
 
We ended up needing to add a few seat walls that will act as retaining walls. I'm actually pretty happy with the change. PB not charging anything extra either so good all around. Design only on paper so far. They haven't gotten to that stage yet.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.