Bought a home with a pool. It's a learning process when previous owner left no paperwork for equipment. Have recently replaced a T15 salt chlorinator and also flow switch. All seemed fine for a brief time. Then system started showing " chlorinator off, Salt high." I've researched a lot but can't find an answer. I found your board today with others having the same message. Need help. Salt tests shows 2900ppm. Have not added salt . So I am wondering if it's an equipment issue. Someone please send me any suggestions to check /troubleshoot.
New member having problems with Goldline Aqua Logic system.
- Thread starter charkd245
- Start date
- May 3, 2007
- 16,976
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
After you get this error, then try this:
Go to "Diagnostic Menu", right arrow, plus key
See if the error comes back or it starts operating properly
Do you have a solar heater or run another type of heater running?
What is the version of the AquaLogic? In the menu, go to "Diagnostic Menu", then left arrow 5x.
Go to "Diagnostic Menu", right arrow, plus key
See if the error comes back or it starts operating properly
Do you have a solar heater or run another type of heater running?
What is the version of the AquaLogic? In the menu, go to "Diagnostic Menu", then left arrow 5x.