New IG pool in UT

Jump to latest Follow Reply
C

ckkone

0
May 2, 2011
7
West Jordan, UT
Hello,

We are so excited to be swimming, I lurk around here quite a bit and figured I would show my recently completed project.

Builder: Best Pools Inc.
16' x 32' ICF IG Pool
Plastimayd 28mil liner
3' shallow end, 4.5' deep end
Pentair equiptment - Mastertemp 250, Clean and Clear Plus 420, 1HP SuperFlow, 250w AquaLumin III nicheless light
SGS 3000 Salt Chlorine Generator
Intermatic Pool timer
Pool Cover Specialists automatic pool cover

I have some more pictures that I will add in a day or two.

1.jpg


2.jpg


3.jpg


4.jpg


5.jpg


6.jpg


7.jpg


pool1.jpg


pool.jpg
 
Hi, I'm doing a similar build... just curious what skimmer you used and what brand of automatic cover? I'm trying to find a track for the liner that is wide enough to fasten to my icf wall!

thanks,
jer
 
Pool Cover Specialists (http://www.poolcovers.com) supplied the track and delivered it to the job site and it was installed by the pool builder.

Are you worried about how the track is going to be secured to the insulation? What my PB did was put about a 4" wide notch in the insulation every 2' or so, and cut some strips of Trex decking about 4" x 6". When the forms were filled with concrete they inserted the Trex into the notch and used some 4" screws to embed it in the concrete. When everything was dry this gave them something that wouldn't rot and allow them to attach the track. My PB had a form that I think my be a proprietary thing that fit on Pool Cover Specialists track to pour the decking, so that my be an issue for you as well.

See the arrows in these pics and you can see the notch with the trex:

1.jpg


2.jpg
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply