New on this forum. I have a Pentair EasyTouch 8 Aux 520657 motherboard coming with 2.180 firmware to replace my existing 520657 that is acting wonky. I am good at removing and carefully reinstalling cables and connectors but programming back to same but not certain I have the patience to for programming. Looking to pay for someone to setup.
New Guy
- Thread starter CellTowers
- Start date
Wobblerlorri
Bronze Supporter
- Apr 16, 2019
- 2,010
- Pool Size
- 4024
- Surface
- Vinyl
- Chlorine
- Liquid Chlorine
Welcome to TFP! Be sure to read ABCs of Pool Water Chemistry and take a spin through Pool School too while you're waiting for your part. Any questions, just ask away in the appropriate forum.
- Oct 25, 2015
- 5,174
- Pool Size
- 25000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Cell towers,
Welcome aboard! We have several experts here on Pentair automation. Please feel free to ask any questions you have as you proceed. It would be very helpful if you could fill out your signature. This will place all the basic information about your pool automatically at the bottom of your post. This helps you get quicker information with less return questions and also helps our volunteer experts be more effective with their time. Here's how to do it.
Chris
Welcome aboard! We have several experts here on Pentair automation. Please feel free to ask any questions you have as you proceed. It would be very helpful if you could fill out your signature. This will place all the basic information about your pool automatically at the bottom of your post. This helps you get quicker information with less return questions and also helps our volunteer experts be more effective with their time. Here's how to do it.
Chris
