Hey guys,
I just starting testing with the TF-100 kit and found that my CYA, TA, and PH were all very high. I added Muratic Acid to lower my TA (it was 350). Here are my latest test results:
FC 2.0
CC .5
TA 250
CYA 90
PH 6.8
CH 40
My question is what is the best method to lower the CYA and TA? My PH is already low but my TA is still reading high. Any other advice would be appreciated!
Thanks!
I just starting testing with the TF-100 kit and found that my CYA, TA, and PH were all very high. I added Muratic Acid to lower my TA (it was 350). Here are my latest test results:
FC 2.0
CC .5
TA 250
CYA 90
PH 6.8
CH 40
My question is what is the best method to lower the CYA and TA? My PH is already low but my TA is still reading high. Any other advice would be appreciated!
Thanks!