Hi all,
Our in-ground pool was completed in December. It is 15.6k gallons, using a chlorine system, and has a pebbletec finish in central TX.
I’ve started with the pool math app and like it so far, but have a question on the target ranges in the app.
The pool builder and pebbletec chemistry targets are shown below. Overall most targets are aligned, but The pool math app gives a target range for TA of 50-90 and CH of 250-650 which is different than the pebbletec recommendations.
Is one option more correct than the other and if so, why?
PebbleTec Pool Chemistry Basics
Next, it’s time to test the water to determine the current state of your pool’s chemical levels. For a balanced pool, these are the ideal ranges you want to see during testing:
thanks in advance for the help.
Our in-ground pool was completed in December. It is 15.6k gallons, using a chlorine system, and has a pebbletec finish in central TX.
I’ve started with the pool math app and like it so far, but have a question on the target ranges in the app.
The pool builder and pebbletec chemistry targets are shown below. Overall most targets are aligned, but The pool math app gives a target range for TA of 50-90 and CH of 250-650 which is different than the pebbletec recommendations.
Is one option more correct than the other and if so, why?
PebbleTec Pool Chemistry Basics
Next, it’s time to test the water to determine the current state of your pool’s chemical levels. For a balanced pool, these are the ideal ranges you want to see during testing:
- pH: 7.2 to 7.6
- Free Chlorine: 2 to 4 ppm
- Total Chlorine: No higher than the Free Chlorine
- Total Alkalinity: 80 to 120 ppm
- Calcium Hardness: 200-400 ppm
- Cyanuric Acid: 30-50 ppm
thanks in advance for the help.