Hello all,
First I want to say thank you. This forum has been a wealth of knowledge. After several months of reading and researching and getting several bids we finally signed a contract and should start the dig this week. Thanks to this forum I feel confident in understanding the process and my build. I appreciate any input! Our yard is small! It will pretty much be all pool and decking.
The basics:
Free form, approximately 10,000 gallons.
Approx 30' x 17.5' x 11.5'
Cabo shelf first step 7" (still deciding on the depth, we like the shallow depth and Ledge Loungers but know it will be a slightly deep first step)
3'-6' depth
7' Spa, raised 12" with ledgestone face. 4 jets
Pool, split main drain. 1 skimmer, 3 returns. Autofill
All Pentair Equipment. ET 8, Screenlogic, IC40, Inteliflow VSP, 3/4 booster, 400k Mastertemp
Bubbler, 5G light in pool and Spa
Legend Pressure Side (I know robots are huge here but they are installing the booster for the bubbler so the cost was marginal, I do like the idea of being able to leave the sweep in the pool when not in use. I'm sure I will end up with a robot.)
Blue Surf Pebble Sheen
Stamped Colored concrete decking
Flagstone cap on spa
We're also still deciding where to locate the bubbler on the shelf. With no chairs it would make sense to put it in the middle, but with chairs it seems like it would work best offset.
First I want to say thank you. This forum has been a wealth of knowledge. After several months of reading and researching and getting several bids we finally signed a contract and should start the dig this week. Thanks to this forum I feel confident in understanding the process and my build. I appreciate any input! Our yard is small! It will pretty much be all pool and decking.
The basics:
Free form, approximately 10,000 gallons.
Approx 30' x 17.5' x 11.5'
Cabo shelf first step 7" (still deciding on the depth, we like the shallow depth and Ledge Loungers but know it will be a slightly deep first step)
3'-6' depth
7' Spa, raised 12" with ledgestone face. 4 jets
Pool, split main drain. 1 skimmer, 3 returns. Autofill
All Pentair Equipment. ET 8, Screenlogic, IC40, Inteliflow VSP, 3/4 booster, 400k Mastertemp
Bubbler, 5G light in pool and Spa
Legend Pressure Side (I know robots are huge here but they are installing the booster for the bubbler so the cost was marginal, I do like the idea of being able to leave the sweep in the pool when not in use. I'm sure I will end up with a robot.)
Blue Surf Pebble Sheen
Stamped Colored concrete decking
Flagstone cap on spa
We're also still deciding where to locate the bubbler on the shelf. With no chairs it would make sense to put it in the middle, but with chairs it seems like it would work best offset.