I have 10% bleach I bought from the pool store a couple days ago. They sell a lot, so it should be pretty fresh. I currently have 1.5 gallons. How much should I pour?
New build, first post
- Thread starter Johnnie
- Start date
- Jun 22, 2014
- 52,028
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Use the PoolMath tool and enter your current FC (basically zero) and your target/goal. Make sure your pool size is listed as well. It should be somewhere about 1 quart, 1 cup and 4 ounces. You don't have to be perfect, so about 1.5 quarts is good. But test it again later this evening to make sure the FC is staying somewhere around 6-8 and never below 4 with your current CYA of 50.
Would that be the "effects of adding" tab in the mobile app? Looks like 0.5 gallon will raise the FC by 7.2.
- Jun 22, 2014
- 52,028
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Correct. I'm not on the app right now, so if you need to scale-back on the 10% and just add a little over a quart that's fine.
I aimed to get as close to 1.5 quarts as I could. Texas Splash, Thank you so much for responding to me so quickly.
