I have been using the TFP methods for 6 weeks or so but my pH has been running on the high end of normal. I still had some pH down from the pool store so I used it but now need to add something I've never done before-muratic acid. I looked for some at Lowes the other day (because I knew I was going to need some on hand) but didn't find it in the pool section. After reading a little more on here, I will stop by Sherwin Williams after church and see if they have some. My levels today are as follows.
FC 1.5 I will be adding some bleach
CC 0
CH 100
TA 90
CYA 40
pH 8.2
Borate 40
I knew something was out of balance because my skin felt so dry after swimming yesterday afternoon. So ya'll please check behind me-I will add 1/3 jug of 10% liquid chlorine (Walmart), I don't need to treat the TA or CH, 56 oz of Muratic acid (assuming the paint co carries 31%) and 1 and 3/4 cups of stabilizer in a sock. This will be the first time adding muratic acid for me so I appreciate any tips ya'll have. Thanks!
FC 1.5 I will be adding some bleach
CC 0
CH 100
TA 90
CYA 40
pH 8.2
Borate 40
I knew something was out of balance because my skin felt so dry after swimming yesterday afternoon. So ya'll please check behind me-I will add 1/3 jug of 10% liquid chlorine (Walmart), I don't need to treat the TA or CH, 56 oz of Muratic acid (assuming the paint co carries 31%) and 1 and 3/4 cups of stabilizer in a sock. This will be the first time adding muratic acid for me so I appreciate any tips ya'll have. Thanks!