Need help with newly replastered pool

Jump to latest Follow Reply
F

flippinGeo

0
Bronze Supporter
Oct 8, 2016
92
Maryland
Hi all.

When opening the pool this year we had planned on draining and refilling the water. After 2 years of troubled algae, I determined that our CYA was off the charts, rendering our chlorine almost worthless. Anywho, when we drained it, this spring I noticed troubling plaster issues and we just had it replastered (Thursday).

l’m now in a routine of brushing and I’d like to know a few things about getting this pool restarted. Our contractor has been really vague about our startup procedures.

  1. When can I begin chlorination?
  2. When can I begin vacuuming?
  3. And the most important question, according to my daughter, when can we swim in it?
I’m working now to keep it brushed 2-3 times a day to keep the surface smooth while it cures. I’m also adding acid to bring my pH down to ideal.

Thanks to anyone who has replaster routine expertise that can help me out.
 
Hi Gumbalskip! Welcome to TFP. Man, did you stumble onto the exact right forum!!

Just as Allen suggests, use the guides. I used the NPT card. Your PB is doing you a favor. A lot of them don't know all that much about startup, and if he isn't imposing any warranty-mandated regime, then you're free to do it yourself, and do it right.

Get started on Pool School, right now. Read it twice. There's an ebook, too.

Pool School - Pool School

Order a proper test kit, right now. There's only really two to consider for your pool. The TF-100 or the Taylor K-2006C. Most here recommend the TF-100. I have the Taylor. They both use the same chemicals and provide the same excellent results.

Pool School - Test Kits Compared

Ask lots of questions here if you get stumped. You'll get lots of help. But it really is very simple to do.

Stay out of the pool stores. Don't hire a pool guy. Let the PB walk away.

Here's the rub. Move quickly. This is the most important time in the life of your new pool surface. The first day is the most important, then the next day, then the first week, then the first month, etc. What you do right now, or neglect to do, can impact how the finish will look and feel, and how long it will last. Any damage done now is pretty much irreversible. That is not meant to scare you away from doing it yourself. It's just meant to give you a sense of urgency about it. And to encourage you to do it yourself, because I guarantee you no one will care to do it right as much as you will.

Good luck. Lot's of people here to help when you need...
 
Thanks guys. I have the deluxe Taylor test kit. I realized after I took in my first sample yesterday, that this is very much something I’d rather just do myself. I’m very diligent about my chems/water balance and understand it pretty well. It was just not made clear to me when I could start normal routine maintenance - vacuuming, chlorination, etc.

The tip about wheelless vacuum is good. I’ll need to get one.

thanks again and I’ll read up on the resources you guys sent.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply