I just installed a Pentair IntelliFlo Variable Speed Pump 011018 and need a little help setting it up. The SWG cuts out below 1500 rpm. I was thinking about running it at 750 RPM all day with a increase of speed to 1500 for 3-4 hrs for the SWG. I figured out how to program the time for 1 speed but not multiple.
Also I get a bit of vibration below 1200 with the worst between 850 and 1100. at 450 rpm it sounds like the motor does a slow squeak
I am open to any other ideas how to set up the schedule too.
I had the old 1hp pump running 7 hrs with the SWG at 15 %
Thanks for the help
Also I get a bit of vibration below 1200 with the worst between 850 and 1100. at 450 rpm it sounds like the motor does a slow squeak
I am open to any other ideas how to set up the schedule too.
I had the old 1hp pump running 7 hrs with the SWG at 15 %
Thanks for the help