Nature2 / Aquapure - RS485 and beeping *video

[Ebass922]

I know This thread is on the older side but I was wondering if this was ever resolved. I’m running into the same issue as you. Could you please provide an update?

Thanks.

 

[Newdude]

Hey Ebass and Welcome !! The OP you asked never returned or visited since July so it's unlikely they'll respond. I moved you to your own thread to get you current eyes on the issue.

Detail the problems and we'll go from there.

Knowing little about them, I'd ask @PoolGate or @HermanTX. @ajw22 is no slouch either.

 

[ajw22]

Aqualink losing connection with Aquapure is a common weakness of the system. As was suggested in the other thread reseat the RS-485 connections and power everything off and on.

If you have other problems then tell us what they are...

Jandy AquaPure SWG - Further Reading

www.troublefreepool.com

 

[JamesW]

You can disable the beeper/buzzer until you can get the problem resolved.

Move the jumper to off.