My pump is running outside schedule

[locutusut]

I have a Pentair VSF 011056 pump, and I have three programs but recently disabled two of them over the winter months that would typically run during the day. The remaining program is set to run from 12 AM-6 AM; however, I'm seeing the pool pump continue to run outside of this schedule on this program. I have no automation exception that it connects to my Pentair solar unit, which is currently disabled. Both have freeze protection turned off, so I could isolate the problem. Still, the pump continues to run.

Why would my pump continue to run outside a set schedule?

Thanks!

 

[Jimrahbe]

L,

The pump will not run unless there is a schedule or you manually tell it to run.

I'd want to reset the pump and start over.

Thanks,

Jim R.

 

[locutusut]

If I press start/stop twice (twice to turn on the green light), the pump turns on program 3, which I currently have set to Manual. Only Program 2 is set to Schedule.

The reset button on the panel seems only to reset alerts. Is there some other way to reset the pump?

Thanks,
Lou

 

[locutusut]

I found the issue. There was an "external" program enabled that, once disabled, stopped the running out of schedule. Still not sure why, but that was the reason.