- Jun 22, 2014
- 52,024
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Good morning! So a few reminders:
- No need to increase teh FC so high. I know your thread is titled Mustard Algae, but honestly we aren't sure you have it just yet. Even if you do have MA, the process is teh same initially. You must perform the normal SLAM Process and pass those 3 criteria noted above in the earlier post. With a CYA of 40, don't bother going above an FC of 16. You'll only waste chlorine and you end up using more reagents for testing. We also don't want you to do anything bad to the liner.
- Now if it's been a while since you tested the CYA, but might want to do that soon just to make sure you are indeed at the proper SLAM FC level.
- When you can, I would like to see 2 or 3 pics of your pool form a distance so we can see everything from different angles.
- No need to increase teh FC so high. I know your thread is titled Mustard Algae, but honestly we aren't sure you have it just yet. Even if you do have MA, the process is teh same initially. You must perform the normal SLAM Process and pass those 3 criteria noted above in the earlier post. With a CYA of 40, don't bother going above an FC of 16. You'll only waste chlorine and you end up using more reagents for testing. We also don't want you to do anything bad to the liner.
- Now if it's been a while since you tested the CYA, but might want to do that soon just to make sure you are indeed at the proper SLAM FC level.
- When you can, I would like to see 2 or 3 pics of your pool form a distance so we can see everything from different angles.