Hi everyone! So… We’ve been dealing with mustard algae and our biggest issue has been that our stabilizer is too high. So essentially the chlorine isn’t able to do it’s job to get rid of the mustard algae. Long story short: after emptying and to the skimmer and filling 8 times, I was finally able to treat the water only for the issue to still persist. Got another water reading done and yup stabilizer STILL too high. Alas, after being told to dilute 4 more times we have decided to empty the pool, clean the mustard algae out and start over. My question is: do you all have any advice on how to clean the vinyl liner from the mustard algae once the pool is empty? I want to make sure every single particle of that algae is GONE. Thanks in advance for all opinions!
Mustard Algae
- Thread starter Tbmnola
- Start date
- Jun 24, 2021
- 7,500
- Pool Size
- 30000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60
Hey! Welcome to TFP.
Best mustard algae advice:
www.troublefreepool.com
Best mustard algae advice:
Mustard Algae
Today We are going to show you how you can get rid of mustard algae in your pool. By following the steps in this guide and with no expensive chemicals.
www.troublefreepool.com
MITBeta
Gold Supporter
- May 28, 2020
- 1,196
- Pool Size
- 13000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
You can't completely empty a vinyl lined pool without risk of shifting the liner.