Multiple connections to Jandy RS485 port

[rsg123]

I am adding a Jandy Truclear SWCG (I know, I know, but I already purchased it). The power center will be very close to this pump so I will be getting power from it. Just to verify, can I add wires to the existing RS485 ports (pictured here on the left) so the Truclear can communicate with the Aqualink? I believe I read somewhere that multiple devices can be connected to the same RS485 communication port.

 

[PoolStored]

Jandy TruClear with Jandy Pump setup

Thought I'd share a pump diagram to help others. In the next few weeks I will setup the unit as follows. Will be installing a Jandy TruClear with a Jandy VS FLOPRO 1.65 pump. I would like the units interconnected with TruClear using RS485 to the JEP-R pump controller. Advantage is when the...

www.troublefreepool.com