- Jun 23, 2024
- 79
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I’m about four or five days into a slam, having failed the overnight chlorine test and having combine chloramines of 1.0. The water has been crystal clear, but I just noticed today this patch of what I assume is algae on the stone underneath the overflow from my spa. I don’t run the overflow all the time, but twice a day to get the chlorinated water back into the spa and circulate.
This one spot definitely gets wet when the waterfall is running, especially as it shuts off. If I touched the spot with my fingers, whatever it is crumbles off in my hand so I imagine it. It’s also going into the water.
Any recommendations on how to remove it from the stone/kill it? Then I’ll have to figure out why it’s forming in the first place.
This one spot definitely gets wet when the waterfall is running, especially as it shuts off. If I touched the spot with my fingers, whatever it is crumbles off in my hand so I imagine it. It’s also going into the water.
Any recommendations on how to remove it from the stone/kill it? Then I’ll have to figure out why it’s forming in the first place.