I am looking to do the Metal Treatment today on stains(iron) that are not too bad....Yet! I am a little confused. Everything I have been reading for a month has me lowering the ph to under 7.2. Metal Magic says 7.5 or higher and and chlorine to under 3 and the best at 1. I will get it under 3 but when I get algae I get pink algae and I am a bit worried about that with not being able to shock for a week or two. So I figured before I add AA I will get the ph to 7.5, add the AA and wait until stains lift and add the MM in a half hour to one hour. Run for 48 hours and I will clean the cartridge every 24 hours. for a good number of days until it looks normal. Slowly bring up chlorine to a more comfortable level for a week or two so that I am not in the minimum area. My CYA has to be around 35-40 as I haven't tested in the past couple of weeks but I have a good idea its no higher. It doesn't matter because I have to drop chlorine anyway. Does this sound correct?
A couple of questions:
1. Should I use polyquat 60 for a safeguard?
2. Am I right in thinking that this won't get rid of all of the iron from the water and thus not get rid of the problem? It is very light staining but it is there especially at night when I spot remove and see the cleaned area against the not clean area and slowly of course the stains return.
3. I am closing the pool in the next 2-3 weeks and is draining as much water as safe a better solution to my problem? And letting rain and snow fill it over the winter?
4. Or is a combination of the two better? I am not sure how the metals being in solution and out of solution will affect the draining.
5. I see the reddish brown sediment on the bottom now for weeks and assume that's the iron. Will I see the sediment after MM or is it floating in the water crystalized?
A couple of questions:
1. Should I use polyquat 60 for a safeguard?
2. Am I right in thinking that this won't get rid of all of the iron from the water and thus not get rid of the problem? It is very light staining but it is there especially at night when I spot remove and see the cleaned area against the not clean area and slowly of course the stains return.
3. I am closing the pool in the next 2-3 weeks and is draining as much water as safe a better solution to my problem? And letting rain and snow fill it over the winter?
4. Or is a combination of the two better? I am not sure how the metals being in solution and out of solution will affect the draining.
5. I see the reddish brown sediment on the bottom now for weeks and assume that's the iron. Will I see the sediment after MM or is it floating in the water crystalized?