- Jun 4, 2016
- 65
- Pool Size
- 27400
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Can I generally rely on the readings I get from my Hayward AQR15 for salt PPM or ought I really do a test? If so, are Aquachek strips good enough or do I really need to buy a K-1766 or something similar?
Additionally it seems that my salt is dropping off rather quickly. Evaporation should not affect a change, right? Mine was high (up to 4400 according to my SWG) but then I lost approx. 20% of the water (over days, I was refilling) due to a leak which dropped it to 3100-3200. I added a bag and it read at 3300-3400 for a few days but then dropped back to 3200, any thoughts? There are no apparent leaks now.
Additionally it seems that my salt is dropping off rather quickly. Evaporation should not affect a change, right? Mine was high (up to 4400 according to my SWG) but then I lost approx. 20% of the water (over days, I was refilling) due to a leak which dropped it to 3100-3200. I added a bag and it read at 3300-3400 for a few days but then dropped back to 3200, any thoughts? There are no apparent leaks now.