Low flow & salt cell not working

[PoolStored]

I did fill out that info. Is it not visible?

You filled out your profile, not your signature. Read the link I posted...

 

[Rancho Cost-a-Lotta]

Your signature appears under each post. If you're on a cell phone, turn it sideways to landscape mode to make them visible.

Fill out this section in your account settings...

https://www.troublefreepool.com/account/signature

 

[SDPadres]

Well worth the cost. You'll achieve more accurate and consistent results. Buy it.

I'll have to order it. I got the TF-100 Salt kit.

 

[SDPadres]

I cleaned the filter and it fixed my flow issues. The salt cell is working again and so is the heater. The pool vacuum works but I might need to get it serviced soon. Thanks everyone. This site is great!

 

[PoolStored]

Thanks everyone. This site is great!

If you found value, you might consider becoming a supporter....

Become a TFP Supporter

Help Support TFP Trouble Free Pool is run by a dedicated group of volunteers that … Read more…

www.troublefreepool.com

 

[SDPadres]

I cleaned the filter earlier this week and all the flow issues have been resolved. The SWG is working, vacuum, and heater too! I have some questions about CYA and pump settings but I'll start new posts. Thank you everyone.

 

[PoolStored]

You might consider doing an OCLT to rule out algae...Link-->Overnight Chlorine Loss Test

 

[SDPadres]

I'm waiting for the test kit. It should be arriving on Monday! In the meantime I'm adding 85 ounces of 12.5% chlorine every night and I have my SWG at 75% for 8 hours. I tested this morning and I have over 6ppm of chlorine at the return and slightly under 5ppm away from return lines. This was tested at the pool store so not sure how accurate.