Hello!
we are at our wits end.We have a new 24' above ground pool.
It was installed last august and all was fine. We closed the pool and just opened it about 2 weeks ago.
We did all the recommended steps. The initial psi about 12-15. output flow was strong. Then the next morning
we noticed the flow was very weak and the psi 20.
We completely cleaned the pump and impellers. We removed the sand from the filter cleaned everything and replaced it with new #20 silica sand.
We back washed, rinsed and restarted the system. Psi again about 15. and STRONG flow from the output. After about 4 hours
again the psi were about 20 and the flow almost nothing. We have redone everything several times all with the same results.
We are frustrated and don't know what to do.
we are at our wits end.We have a new 24' above ground pool.
It was installed last august and all was fine. We closed the pool and just opened it about 2 weeks ago.
We did all the recommended steps. The initial psi about 12-15. output flow was strong. Then the next morning
we noticed the flow was very weak and the psi 20.
We completely cleaned the pump and impellers. We removed the sand from the filter cleaned everything and replaced it with new #20 silica sand.
We back washed, rinsed and restarted the system. Psi again about 15. and STRONG flow from the output. After about 4 hours
again the psi were about 20 and the flow almost nothing. We have redone everything several times all with the same results.
We are frustrated and don't know what to do.