I had a new liner installed early June. We had a very wet June with lots of rain so my pool never had an opportunity to get low. A couple weeks ago I noticed I had lost about an 1 1/2" of water in just a couple days. I thought it was hot and dry so chalked it up to evaporation. Last week the pool was again low so I added water and left town for a week. Two days later my pool lady calls and says you need water!
Over this past weekend I did the bucket test, it is not evaporation! My pump does not run over night so I am pretty certain I do not have a pressure leak since I lost an inch of water overnight.
I let the water leak out until it stopped. I lose right at 2" of water which is just enough that my skimmers are not getting enough water. I bought a die kit and since the water level stopped dropping I know it is not the bottom or bucket of the skimmer boxes, I know it is not the main drain and I know it is not the light. The water is still on the skimmer box frames across the bottom so I am relatively certain it is leaking either on the sides of one of the skimmer face plates or along side the steps where the steps meet the liner. Once I get the water level back up above the leak I will use the detector again and try to figure out where it is leaking.
Yes, I called the pool guy that installed the liner twice and both times he is like oh you got a leak let me call you back. I have yet to get that call back so I am thinking he is not coming to help me!
IF it is leaking where the liner meets the steps how would I repair that? Or if it is leaking around the faceplate of one of the skimmers? Remove the faceplate and silicone the heck out of it to create a gasket?
Long post I know
Over this past weekend I did the bucket test, it is not evaporation! My pump does not run over night so I am pretty certain I do not have a pressure leak since I lost an inch of water overnight.
I let the water leak out until it stopped. I lose right at 2" of water which is just enough that my skimmers are not getting enough water. I bought a die kit and since the water level stopped dropping I know it is not the bottom or bucket of the skimmer boxes, I know it is not the main drain and I know it is not the light. The water is still on the skimmer box frames across the bottom so I am relatively certain it is leaking either on the sides of one of the skimmer face plates or along side the steps where the steps meet the liner. Once I get the water level back up above the leak I will use the detector again and try to figure out where it is leaking.
Yes, I called the pool guy that installed the liner twice and both times he is like oh you got a leak let me call you back. I have yet to get that call back so I am thinking he is not coming to help me!
IF it is leaking where the liner meets the steps how would I repair that? Or if it is leaking around the faceplate of one of the skimmers? Remove the faceplate and silicone the heck out of it to create a gasket?
Long post I know