phonedave
Well-known member
- May 30, 2012
- 2,272
- Pool Size
- 17000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Turbo Cell (T-CELL-5)
Last edited:
RIPOpened this weekend. After about 10 years of use, my cover pillow finally bit the dust.
View attachment 647483
View attachment 647486
Almost swimmmy timeThe difference from yesterday evening and this morning is crazy! View attachment 648630View attachment 648631
Almost! I've gone through 2 boxes of DE! Just opened the 3rd one about an hour ago but had to shut the pump down because the water level is to low. I'm topping off right now. Hopefully I can start her up soon. I'll run another battery of tests and see what she needs. I'm holding off on salt and calcium at the moment.Almost swimmmy time!!
Getting there!
Have been experiencing a lot of blow back of DE into the pool. The robot picked up a lot of it. I tightend my unions a 1/4 turn at the pump. We'll see if that helps. That's the easiest fix. I noticed I'm not losing prime once I did it. I have also cut the DE addition to 3 scoops instead of 4 on a backwash without a complete tear down. Pool looks great though considering I'm only 6 days into the SLAM.Getting there!
Get a thread going in the Algae subforum. We can give pointers and/or cheer your progress.Working through a waste and replace cycle right now before slamming