having a new problem with my hayward turbocell. My salt was low (2600) , so I added 2 bags over the 5 days (2nd one 2 days ago). This morning I tested the salt manually (2x) with the Taylor test kit and was at 3000. At one point the afternoon the instant reading on the SWG was at 3300.
Now my SWG has the salt instant reading at 2400 and the "check salt" light, and the "inspect cell" light as well. I removed the cell and cleaned with acid-water mix. It was ok right when I restarted it, but now the "inspect cell" light is flashing again (and check salt still on also).
Any idea on my next step to troubleshoot this?
thanks!
Now my SWG has the salt instant reading at 2400 and the "check salt" light, and the "inspect cell" light as well. I removed the cell and cleaned with acid-water mix. It was ok right when I restarted it, but now the "inspect cell" light is flashing again (and check salt still on also).
Any idea on my next step to troubleshoot this?
thanks!