- Jun 7, 2017
- 9,146
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I just cut my 25x45 solar cover to size and installed it. I am doing a test and running my heater until 9:00pm tonight, turning it off, and seeing how much heat I lose by tomorrow morning. I'll post results back here!
Temp when I turned on the heater was 55.
Low tonight is supposed to be 41.
FYI: Cutting was simple. Used a nice sharp set of scissors and just laid the cover over the pool and cut the outline. I smoothed out the bubbles with the brush. All in all it was about an hour to cut.
Temp when I turned on the heater was 55.
Low tonight is supposed to be 41.
FYI: Cutting was simple. Used a nice sharp set of scissors and just laid the cover over the pool and cut the outline. I smoothed out the bubbles with the brush. All in all it was about an hour to cut.