- Jun 4, 2012
- 78
I have 2 large Jandy LED Watercolor lights in the pool. One works fine.
The other light (in shallow end of pool) has something wrong. The light turned off (the deep-end light was still on). Then it turned on & dimmed until it went off again.
Shut-off the power and took a look. The outer-most ring where the pilot-screw goes in can be pulled out.
I'm thinking it may just mean that I have to align & tighten down the pilot screw because that is part of the grounding circuit, correct?
The installation & operations manuals don't provide a lot of help.
I would appreciate any guidance!
33,000 Gallon vinyl liner pool, SWG, Cartridge filtration, newly built 2014
The other light (in shallow end of pool) has something wrong. The light turned off (the deep-end light was still on). Then it turned on & dimmed until it went off again.
Shut-off the power and took a look. The outer-most ring where the pilot-screw goes in can be pulled out.
I'm thinking it may just mean that I have to align & tighten down the pilot screw because that is part of the grounding circuit, correct?
The installation & operations manuals don't provide a lot of help.
I would appreciate any guidance!
33,000 Gallon vinyl liner pool, SWG, Cartridge filtration, newly built 2014