Jandy VS FloPro 1.65 and JEP-R/e pump Controller

[twofus]

Need some guidance from the pros here. I have a new VS FloPro variable speed pump that was installed with an e pump controller (JEP-R). I prefer to be able to control the pump via wifi. Will the JEP-R controller accept an iAquaLink 2.0 web connect device? Perhaps better put, what is the best way to be able to control this Jandy pump via the web?

Lastly, if I desire to control more than the pump in the future, do I need the entire iq904-PS kit? I only have a waterfall, pool lights, and the pump. What would be the best method to control those three items (later will add heater) via the web equipment and cost wise?

Thank you kindly for pointing me in the right direction.

 

[kadavis]

http://www.jandy.com/~/media/zodiac/global/downloads/sl/sl6212.pdf, do you have any automation installed?

 

[twofus]

Figured it out, thanks. Looks like I'd have to get rid of the JEP-R controller and use the iqpump01 instead. No, no automation yet. Any suggestions?

 

[jstephens1]

I have the same pump but the part number has AUT at the end. Not jep controller. I do have the iqpump01. It’s great [emoji106]