Jandy Jxi - Display Off

[gnr5]

Hey all, we're currently remodeling our pool, and the regular pump has been disconnected for a while. Yesterday I decided to turn on the breakers because we're very close to replumbing phase and noticed that on the heater the display is OFF. I rechecked the wire with a multi meter, I do have electricity coming into the board. My question is, does the pump needs to be running at all? Remember the heater is not plumbed at all.

Thanks!

 

[PoolGate]

If the heater has power, it should have the display on, even if it is being controlled by automation.

 

[gnr5]

ah Crud! Its a new heater, we turned it on once right before the remodel, we haven't used it at all. Any easy troubleshooting options?

 

[PoolGate]

You could pull the panel off there are a couple of fuses on the board itself. Once open, check the voltage and see if you are getting it.