- Jan 30, 2024
- 5
- Pool Size
- 10000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I had a old JVA actuator, it was sticking so I replaced it with a new one. New one turns 180 without any problem.
However, the old one used to make continuous low tone clicking sound, as if there is a mechanical timer in it. It is not the motor spinning.
The new one surprisingly does it too. I have two JVAs, the other one doesn't make that sound.
And more surprisingly, when I turn all the pool power off from the main breakers, it continues clicking probably because of the electric left on the capacitor in it. Can it be the minor adjustment needed in the control switches in it?
Any ideas?
However, the old one used to make continuous low tone clicking sound, as if there is a mechanical timer in it. It is not the motor spinning.
The new one surprisingly does it too. I have two JVAs, the other one doesn't make that sound.
And more surprisingly, when I turn all the pool power off from the main breakers, it continues clicking probably because of the electric left on the capacitor in it. Can it be the minor adjustment needed in the control switches in it?
Any ideas?