Jandy Aquapure screen out

[Troy Koch]

jandy aquapure not producing chlorine due to panel being blank
salt level within limits

Hi.. I see from your picture that you had the same issue a year ago that I am having now. I was thinking of replacing the same part r0467400 Jandy aguaPure dispay and circuit board as you did. I see thou after you changed this board that it didn't fix your issue. What finally fixed your issue?? Thanks for your help....

Troy
Atlanta, Ga

 

[Gtyellow]

Had a very similar issue with a very easy fix. The aquapure was blank but the pump was running and the were red lights on the control panel indicating the pump was running.

Fix: check your iaqualink phone app. For me, it didn't register a temperature and the slider said the pump was off. Tap the slider switch to "start" the pump and then check the aquapure display in a few minutes. For me, it began to indicate that chlorine was being produced.