I am a new member to this forum. I have a 26k gallon pool with a large 6k gallon spa. The system was automated back in 2008 with an easytouch control, VS intelliflow, pentair gas heater, large solar array, and IC40. Since then the easytouch has failed. I Live in north florida not near a city and no dealers want to come out here so I have done most of the maintenance. Currently, the system consist of Intellicenter load center, I'm in need of a personality board, I have an IC-60 but need a optional comm board, the pump is a new VSP, the plumbing is set up for pool/spa/overflow, solar, and heater using 4 Jandy three wire valves.
Intro
- Thread starter canoeman
- Start date
- Jun 22, 2014
- 47,798
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
Feel free to post item-specific threads in the other TFP forums as needed. Link below may help as well.
www.troublefreepool.com
Feel free to post item-specific threads in the other TFP forums as needed. Link below may help as well.
Pool Care Basics Archives
Your one-stop shop for all things TFP to include: ABCs of Water Chemistry, Recommended Chemicals/Levels, Test Kits, Troubleshooting, and much more!
www.troublefreepool.com
